As we all know, windows has a fatal error and the error is known as blue screen or blue screen of death (BSOD). This error can be practically very serious because if an error occurs then the windows screen suddenly turns blue and the computer can not be controlled. The only way to end this error is to restart on your computer.
Before knowing how to fix blue screen error on your computer, we must first know the cause of these blue screen errors. The cause of this blue screen error in general there are two kinds which is caused by hardware and by software. Blue screen error was due to conflict or incompatibility between the hardware from one another, or one with software that other software as well as installation of hardware that is not quite right.
Blue screen error usually happens after we installed new hardware or new software. If this problem (error blue screen) occurred after we installed new hardware, how to fix it is:
1. turn off your pc by pressing the power button on your computer casing
2. open the cover of your pc casing
3. Unplug the new hardware is installed, if the hardware is the module that is installed on PCI slot, remove the hardware from the PCI slot
4. Clean the existing brass pins on the module / card
5. Reinstall the hardware with the right position
6. Turn on the PC
Blues screen appear occurs after you install new software. Usually this happens because the new software we install it into conflict with one previously installed software. To overcome this error we follow the following steps:
1. When the blue screen error appears, turn off your PC by simply pressing the power button on the PC casing
2. again turn on the PC by simply pressing the power button and login into safe mode by pressing the F8 key just before entering windows
3. and select "Safe Mode"
4. after windows login into safe mode, uninstall the program that installed the last time that causes the error pc
5. then restart your PC back into normal mode.
No comments:
Post a Comment